Heavy construction equipment is expensive and needs special care when stored. You must protect it from rust caused by freezing and thawing water.
Use Protective Covers
It is advisable to use a quality tarp to cover it to protect it from moisture. You should also ensure that the space is dry and clean. Depending on the type of flooring, you may need to purchase protective floor coverings. Make sure that the space is free of dust and debris and well-lit.
Proper storage is essential for preserving the condition of heavy equipment. If improperly stored, the machinery can break down in the middle of a project and result in costly repairs. The proper storage will ensure that your heavy equipment lasts as long as possible. Follow these tips to keep your machinery in good condition. The following steps will help you properly store your heavy equipment. You can use ground covers to protect it from dirt and moisture.
Make Sure Its Clean Before Storage
If you’re storing equipment for extended periods of time, it’s important to make sure that all the moving parts are clean and clear. If the equipment uses fuel, be sure to disconnect all power sources before storing it. The owner’s manual will explain lockout procedures. Checking for rust and corrosion is important for preventing any potential damage. The space between machinery should be sufficient to prevent accidents or collisions.
Store It In An Enclosed Space
When storing heavy equipment, you should avoid storing it in an open area. If possible, store it in an enclosed space where the fluids can remain at the proper operating temperature. For example, you can use a block heater to start the engine of the heavy equipment. Then, you can clean any moving parts and prevent them from becoming clogged. Adding a stabilizer to the fuel tank will prevent condensation from getting into the lines and affecting the performance of the engine.
Tire Pressure
Always check the tire pressure of heavy equipment before storing it. This will prevent problems like flattening and make the machine less efficient. Inspect the equipment before storing it. If you’ve parked it on cement, make sure you jack up the wheels and remove any damaged parts. Ensuring the tires with a jack will prevent them from flattening. Besides, a jack will prevent damage to the ground.
Start It Up Every Week
While storing the heavy equipment, it is important to check it for damage. It’s best to lubricate the engine and maintain battery power by performing regular maintenance on it. Afterward, you should start it every week as part of your maintenance routine. It is also a good idea to lubricate the parts if they’re in storage. These are just a few of the many tips for heavy equipment storage.